you can see the arrows embedded on the watch bracelet

Tips to Remove Links from a Watch BraceletThese are instructions on how to remove links from a watch bracelet, such as cheap replica watches. However this will also workable for the similar watch bands.Prepare some tools for the operation. In order to remove links from a watch bracelet, you will need a few tools like two pairs of pliers and a push pin. Notice you can see the arrows embedded on the watch bracelet, which tell you two things:1) That they are pins and not screws (for if they were screws you would use a different method to remove the links from the watch bracelet) 2) That is the direction that the pin must be punched out The pin is split on the bottom end, and that acts as a retainer as they "pop" open when they are driven back in. Align the exit hole of the replica watches bracelet link over the opening of the pliers so that no damage will come to the pin as it is driven out. I used a push pin because it has a nice flat top to push against.You should now be able to see the pin as it sticks through.Grab it with the pliers and gently pull it out, making sure not to damage the end of the pin. If the size still not workable foe you then repeat the steps to remove links from the watch bracelet until it is the right size.Re-assemble the watches replica. You will be placing the pin back through the bottom against the arrow direction and slightly pressing it back into place, and remember that the pin is split so do not hammer on it. Once most of the pin is in, you should press on the pins to seat them back into the right position. None of the pin should be extending outside the bracelet.BREITLING-Windrider Chronomat Evolution-19003Our Price:? $87.00TAG HEUER-CARRERA-20007Our Price:? $86.00BREITLING-Aeromarine Super Avenger-19184Our Price:? $93.00BREITLING-Aeromarine Super Avenger-19006Our Price:? $89.00?